BADGE-HCl, 2-[4-(3-Chloro-2-hydroxypropyloxy)pheny]-2-[4-(glycidyloxy)phenyl]propane
BISPHENOL A (3-CHLORO-2-HYDROXYPROPYL) G
CAS: 13836-48-1
Molecular Formula: C21Cl1H25O4
BADGE-HCl, 2-[4-(3-Chloro-2-hydroxypropyloxy)pheny]-2-[4-(glycidyloxy)phenyl]propane - Names and Identifiers
BADGE-HCl, 2-[4-(3-Chloro-2-hydroxypropyloxy)pheny]-2-[4-(glycidyloxy)phenyl]propane - Physico-chemical Properties
| Molecular Formula | C21Cl1H25O4 |
| Molar Mass | 376.87 |
| Density | 1.202±0.06 g/cm3(Predicted) |
| Boling Point | 537.3±50.0 °C(Predicted) |
| Appearance | morphology neat |
| pKa | 13.13±0.20(Predicted) |
| Storage Condition | −20°C |
| Refractive Index | n20/D 1.573 |
BADGE-HCl, 2-[4-(3-Chloro-2-hydroxypropyloxy)pheny]-2-[4-(glycidyloxy)phenyl]propane - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | R36/38 - Irritating to eyes and skin. R43 - May cause sensitization by skin contact |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 - After contact with skin, wash immediately with plenty of soap-suds. S37/39 - Wear suitable gloves and eye/face protection |
| WGK Germany | 3 |
| FLUKA BRAND F CODES | 10-23 |
BADGE-HCl, 2-[4-(3-Chloro-2-hydroxypropyloxy)pheny]-2-[4-(glycidyloxy)phenyl]propane - Upstream Downstream Industry
| Raw Materials | BISPHENOL A-(3-CHLORO-2-HYDROXYPROPYL)- 2,2-BIS[4-(3-CHLORO-2-HYDROXYPROPOXY)PHENYL]PROPANE BISPHENOL A DIGLYCIDYL ETHER RESIN BISPHENOL A (2 3-DIHYDROXYPROPYL) GLYCID |
BADGE-HCl, 2-[4-(3-Chloro-2-hydroxypropyloxy)pheny]-2-[4-(glycidyloxy)phenyl]propane - Introduction
BISPHENOL A (3-chroo-2-hydroxypropyl) G is an organic compound with the chemical formula C15H16Cl2O4. The following is a description of its nature, use, preparation and safety information:
Nature:
-Appearance: BISPHENOL A (3-CHLORO-2-HYDROXYPROPYL) G is A colorless to yellow liquid.
-Solubility: It is not easily soluble in water, but soluble in organic solvents such as alcohols, ethers and esters.
-Melting point: The melting point of BISPHENOL A (3-chroo-2-hydroxypropyl) G is about -5°C.
Use:
- BISPHENOL A (3-chroo-2-hydroxypropyl) G is mainly used as A hardener for epoxy resins, such as in the electronics industry to make circuit boards, and as A crosslinking agent in coatings and adhesives.
-It can also be used as a raw material for the synthesis of high-performance polyesters and intermediates for the synthesis of some other organic compounds.
Method:
The preparation of-BISPHENOL A (3-CHLORO-2-HYDROXYPROPYL) G is usually obtained by P-chloro formylation of BISPHENOL A, and then esterification with glycerol.
Safety Information:
The toxicity and danger of-BISPHENOL A (3-CHLORO-2-HYDROXYPROPYL) G are not fully understood, so it needs to be used in accordance with safe operating guidelines.
-When using this compound, take appropriate protective measures, such as wearing protective gloves and glasses.
-Avoid contact with skin, eyes and respiratory tract. In case of accidental contact, rinse immediately with plenty of water and consult a doctor.
-When storing and handling this compound, relevant safety and environmental protection regulations should be followed.
Nature:
-Appearance: BISPHENOL A (3-CHLORO-2-HYDROXYPROPYL) G is A colorless to yellow liquid.
-Solubility: It is not easily soluble in water, but soluble in organic solvents such as alcohols, ethers and esters.
-Melting point: The melting point of BISPHENOL A (3-chroo-2-hydroxypropyl) G is about -5°C.
Use:
- BISPHENOL A (3-chroo-2-hydroxypropyl) G is mainly used as A hardener for epoxy resins, such as in the electronics industry to make circuit boards, and as A crosslinking agent in coatings and adhesives.
-It can also be used as a raw material for the synthesis of high-performance polyesters and intermediates for the synthesis of some other organic compounds.
Method:
The preparation of-BISPHENOL A (3-CHLORO-2-HYDROXYPROPYL) G is usually obtained by P-chloro formylation of BISPHENOL A, and then esterification with glycerol.
Safety Information:
The toxicity and danger of-BISPHENOL A (3-CHLORO-2-HYDROXYPROPYL) G are not fully understood, so it needs to be used in accordance with safe operating guidelines.
-When using this compound, take appropriate protective measures, such as wearing protective gloves and glasses.
-Avoid contact with skin, eyes and respiratory tract. In case of accidental contact, rinse immediately with plenty of water and consult a doctor.
-When storing and handling this compound, relevant safety and environmental protection regulations should be followed.
Last Update：2024-04-10 22:29:15
![BADGE-HCl, 2-[4-(3-Chloro-2-hydroxypropyloxy)pheny]-2-[4-(glycidyloxy)phenyl]propane](http://res.chembk.com/assets/images/structure/13836-48-1.gif)
Supplier List
Product Name: BISPHENOL A (3-CHLORO-2-HYDROXYPROPYL) G Visit Supplier Webpage Request for quotation
CAS: 13836-48-1
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 13836-48-1
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: BISPHENOL A (3-CHLORO-2-HYDROXYPROPYL) G Visit Supplier Webpage Request for quotation
CAS: 13836-48-1
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 13836-48-1
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History
Raw Materials for BADGE-HCl, 2-[4-(3-Chloro-2-hydroxypropyloxy)pheny]-2-[4-(glycidyloxy)phenyl]propane
BISPHENOL A-(3-CHLORO-2-HYDROXYPROPYL)-
2,2-BIS[4-(3-CHLORO-2-HYDROXYPROPOXY)PHENYL]PROPANE
BISPHENOL A DIGLYCIDYL ETHER RESIN
BISPHENOL A (2 3-DIHYDROXYPROPYL) GLYCID
2,2-BIS[4-(3-CHLORO-2-HYDROXYPROPOXY)PHENYL]PROPANE
BISPHENOL A DIGLYCIDYL ETHER RESIN
BISPHENOL A (2 3-DIHYDROXYPROPYL) GLYCID